I often watch TV sets. The remote control is something that is often held in my hand. What if the remote control is broken in a few years? It is too wasteful to change a TV. Change the original remote control. If you change the TV after a few years, the remote control will be bad if it is broken. Today, Xiaobian introduces everyone to the TV universal remote control . Let’s take a look at the TV home remote control together with the decoration home decoration network.
TV universal remote control principle
The internal chip of the remote controller stores the code that the corresponding appliance can analyze, so that it can communicate with the appliance in use. The internal memory of the chip is expanded by first collecting the parsing codes of all the remote controllers that may exist on the market , and then storing the codes in the chip inside the universal remote controller, and then numbering these codes according to the model of the electric appliance (that is, Code table), in actual use, find the number from the code table according to the model of the appliance, and input the number according to the usage requirements, you can use it.
How to set up the TV universal remote control?
1. From the "code table", find the three-digit code that represents the TV you want to remotely control. Press and hold the "Settings" button, then press the "Power" button, then release the two buttons, and the work indicator lights up. Enter the three-digit code you found, such as 083, enter a digit, the indicator light flashes, after the three digits are input, the work finger turns off the light. After setting, you can use this remote control to remotely control your TV. It is.
2. Turn on the TV, align the TV with the remote control, and press and hold the [Set] button (about a few seconds) until the indicator lights up and then release. Then each time you press the [Volume +] button or the [Volume —] button, the remote control will transmit the code once and the indicator will flash once. Repeat this operation until the [Volume] symbol appears on the TV, then press the [Set] button to complete. At this time, the indicator is off. Check if the function of each key is normal, if it is not reset properly, until the most correct code is found.
It is important to note that in order to make your remote control last longer, it is best not to use old and new batteries together, so the damage to the TV remote is very large.
The above is the relevant answer on how to set up the TV universal remote control. I hope that these two methods of Xiaobian finishing can help you. When you use the remote control, you should also cherish some of them to avoid inconvenience. More professional and wonderful decoration materials knowledge, please pay attention to the decoration home decoration network material selection manual column!
Enamel Board,Combination Board,Magnetic Whiteboard,Melamine Whiteboard
Dongguan Aoxing Audio Visual Equipment CO.,Ltd , https://www.aoxing-alr.com