[ Chinese wardrobe network ] Nowadays, many families will have a solid wood wardrobe , but the maintenance of solid wood wardrobe is very important. If the maintenance is not proper, the life of the solid wood wardrobe will be shortened, which will affect our normal use. Then how to maintain and wax the solid wood wardrobe? The following small series will give you a brief introduction.
I bought a nice solid wood wardrobe and needed good maintenance.
A, waxing. The preliminary work of ironing wax is to prepare for the waxing. Specifically, a wax brush is used to uniformly wax the parts of the surface of the wardrobe.
B, cloth wax. Put the wax that was ordered in the previous step and spread it evenly during the heating process.
C, soup wax. In the process of ironing wax, the temperature is small, and less wax is used. In the hot motion, the wax is opened and slowly deepened into the material.
D, waxing. First, special tools are used. The traditional tools are made of horns, but wax shovel (commonly known as wax driver) made of the same material can be used on the special shape wax shovel. It can be smoothed; but for the parts with enamel carving, a tapered, concave wax shovel is required. For example, in the case of lines, the wax is convex according to the line, and the tool is specially made into a concave shape to facilitate waxing. In the process of waxing, the medicine should be done in one go, and the purpose is to shovel the floating wax on the surface of the wardrobe at one time. Also plays a certain calendering process. The wax is cleaner, the surface feels finer and rounder.
E, rubbing wax. The traditional technique uses a small coarse cloth, a pure cotton cloth, and is stamped like a bath. Not only must it be strong, but also have a certain speed, so that the friction process has a certain temperature, so that the wax can not be fixed, so that the floating wax that has not been shoveled can be removed, and the hand feel is intuitively optimal. After the wax is finished, the surface of the wardrobe cannot be sticky, which can achieve the technical effect.
F, shake the wax. Commonly known as dry bucket wax. It is to use a bristle brush. Generally choose a 7~8cm wide, 12~15cm long blackhead bristle brush, but don't use wild boar, because the hardness is too strong. Wipe all parts with brush shake, including wax in the gap. From the perspective of the wardrobe, the gloss of the surface is the same, and the entire waxing process is completed.
Note: The baked wax must be completely penetrated into the wood. During the whole operation, the temperature of the hot air gun should not be too high. After the wax maintenance is completed, it should be avoided, avoid water, and need to be carefully protected.
The above is the information about the maintenance of solid wood wardrobes and how to wax them, which I hope will help you.
Made by food-grade stainless steel, environmental, reusable and easy to clean. Well made with premium top quality,sharp at the pointed end to impale easily. Humanized design for your customer.There are many type to choose like fish shape wood handle straight skewers.Certainly ,customized is accepted!
Bbq Skewers,Metal Skewers,Stainless Steel Bbq Skewers,Stainless Steel Bbq Hanger
MEO DEMO CO., LTD. , https://www.meobbqtools.com