The same is the wooden furniture, the panel furniture is more novel than the solid wood furniture, easier to disassemble and combine, and the price is relatively low, which is loved by many young consumers. However, in the purchase, consumers often encounter the problem that the panel furniture looks almost the same, but the price is very different. So where is the more expensive panel furniture? How do we distinguish whether the purchased panel furniture is worth the money?
Furniture fans reminded that good panel furniture is the first expensive design, the second is expensive in materials, and the third is in processing.
First, the design
Panel furniture has always been designed to win. Due to the relatively low barriers to entry in the industry, many small businesses blindly pursue their interests, and the situation of plagiarism and copying is very serious. This is also the emergence of a large number of low-end furniture products with similar appearance but different prices. It is synonymous with "bargains". However, with the gradual improvement of people's pursuit of life quality, consumers' understanding of furniture has not only stayed in the function, but also the perfect combination of function and artistry. Good panel furniture tends to increase the added value of the product through a fresh, targeted design, so the price is relatively high.
Second, the material
Regardless of the design, the panel furniture also has the advantages and disadvantages of the materials. If 100% eucalyptus shavings are used to press the wood-based panels and the formaldehyde-free glue is used for bonding, the cost cannot be low.
Most of the more expensive panel furniture is used in the "original" rather than "rejected". The raw material of the panel furniture is also much lower than the price of the original. The main method is to use the wood-like paper veneer to pretend to be the veneer. After one or two years of use, the paper veneer is cracked. There is also the use of hardware. The freely disassemblable combination is the biggest advantage of the panel furniture, so the quality of the connector is closely related to the quality of the whole furniture. The "original" furniture is expensive in these details.
When it comes to the main factors that restrict the price of panel furniture, the most basic difference is definitely the sheet. It is understood that most of the furniture now uses particleboard or MDF, the density is different, the environmental protection level is different, and the price is different. The price difference between domestic and imported plates is very large. The price difference between the same piece of furniture and the use of domestic plates and imported plates is up to 80%. The same use function, why is the price difference so much?
In fact, there is indeed a gap between imported and domestic plates. The reason is that the formaldehyde content of domestic plates is generally higher than that of imported plates. The formaldehyde limit of domestic plates is E1 (E1 ≤ 1.5mg/L), and the formaldehyde limit of imported plates is limited. Up to E0 level (E0 ≤ 0.5mg / L) or super E0 level.
Extended reading: detailed explanation of the process of panel furniture
Third, processing
The panel furniture uses wood-based panels, which are the boards that are broken down into wood chips or wooden pulps, and then re-made. Therefore, when the temperature and humidity change greatly, the “deformation†of the panel furniture is much smaller than that of the solid wood furniture. The high-quality panels used in panel furniture require more elaborate processing and the equipment used is more expensive.
Optional panel furniture "four good"
1, look at the quality of the plate
Most of the furniture sold on the market is made of plywood, with ash as a good texture, beautiful and durable;
If it is a plastic veneer, it should be seen from the side whether there is any seam around the board surface. If there is a gap, the process is not well handled and it is easy to deform;
There is also a fine wood veneer panel, it should be checked whether the seam of the wooden strip is tight, the texture of the wooden strip is smooth, and the texture is disorderly.
2, look at the edge of the veneer
Look carefully, the quality of the edge will largely affect the quality of the furniture. The first is the pros and cons of the edge-sealing material, and secondly, it is necessary to pay attention to whether the edge-sealing is uneven or tilted. Good edge sealing should be tightly stitched with the entire piece. The veneer material has a great influence on the furniture grade.
3, look at the hardware connector
The hardware connector is the most intuitive quality standard. The good hardware should be freely switched, no noise, and the surface coating does not peel off. The hardware of some high-end panel furniture is imported, and the foreign language logo can be found on it. Because the freely disassemblable combination is the biggest advantage of panel furniture, the quality of the hardware connector is very important.
Metal parts require dexterity, smoothness, and good surface plating treatment. There should be no rust, burrs, etc., and the precision of the fittings should be high. Plastic parts should be beautiful in appearance and bright in color. The parts of the force should be strong and flexible, and should not be too thin. The open connection requires flexible rotation so that the furniture will be smooth, easy and free of friction when it is opened.
4, look at the size
At present, the furniture market mainly focuses on complete sets of bedroom furniture and office furniture, as well as multi-functional film and television electrical cabinets and other products. National standards for the main dimensions of furniture are subject to regulatory requirements. For example, the depth of the space in the hanging wardrobe should be 530 mm or more, the height of the table furniture should be 680 mm to 760 mm, and the clearance height between the bookcase layers should be 230 mm to 310 mm.
Compared with solid wood, the price of panel furniture is relatively low, but if you encounter high-priced panel furniture, it is not necessarily set to a virtual price, as long as the design is artistic, select high-quality plates, and carry out fine processing, even if the price It is more valuable than the average furniture of the same type.
2 Tier Dish Drying Rack,2 Tier Kitchen Dish Rack,Two Tier Large Dish Rack,2 Tier Chrome Plated Dish Rack
Jiangmen Xinhui Siqian Xiangyi Metalwork Factory , https://www.xydryingrack.com