The electronic face sheet is a new type of label product that has been developed in recent years. Despite the rapid growth, various problems will occur in the actual production process. Below, the author will introduce some problems and solutions that often occur in the process of electronic surface processing.
In recent years, with the rapid development of e-commerce in China, the express logistics industry has also experienced explosive growth. According to statistics, in 2016, the domestic express delivery business completed 31.35 billion pieces, an increase of 51.7% year-on-year. This is the sixth consecutive year that China's express delivery industry has grown by more than 50%. Among the world's total of about 70 billion pieces of express delivery each year, China accounts for nearly half of the total, and it deserves to be the world's first express delivery country.
The explosive growth of the express delivery industry has also led to the widespread use of electronic face sheets. According to the rookie data, the use rate of domestic electronic face sheets has exceeded 50%, which has become the mainstream of the express delivery industry. The so-called electronic surface sheet usually consists of three layers: the upper layer is a heat-sensitive surface material, which is mainly used to print the sender/sender's name, address and related distribution information; the middle layer is usually the release paper or the glassine base paper. The lower layer is coated with glasin base paper. When using, you can print the relevant logistics information through the thermal printer, and then paste the printed face sheet on the courier. After the delivery is completed, the courier will remove the thermal paper from the paper to remove the bottom. . This is an efficient and environmentally friendly information form. Because the single bill of lading and the picking list use a single heat-sensitive single sheet, there is no copy-up, only the upper and lower joints, the cost can be reduced by at least 5 times compared with the traditional paper sheet, and the picking efficiency can be greatly improved for the customer. Information security adds a guarantee.
At present, there are more than a dozen manufacturers with a monthly output of 50 million to 100 million pieces in China, and the competition is fierce. The price has fallen all the time, and the low profit of products has become an indisputable fact. In addition, an order for making electronic orders is basically a few million or even tens of millions. The production process is relatively complicated. If you are inadvertent, it may lead to customer complaints or even return, so there is a certain risk.
Faced with various situations, how to break the bureau becomes a difficult problem in front of all electronic single-processing enterprises. According to the author's understanding, many companies have begun to make some new attempts. For example, some companies have improved the electronic surface sheet itself, replacing the original three-layer material with two layers of materials, which not only saves costs but also increases profits. Other enterprises start with design, such as printing finer and more complicated pictures in the middle layer. In this paper, the use of middle-layer printing advertising to increase the added value of products; other companies increase the width of printing equipment , improve the company's profits by improving production efficiency, these are relatively good attempts. The author believes that in the future, the electronic side will be diversified, and more new technologies, new technologies, and new ideas will be injected, so that the added value of products will be continuously increased, and ultimately the profits of enterprises will be improved. At the same time, the application of new technologies will also eliminate some enterprises with backward production capacity or weak financial strength, so that the production capacity is reasonable, the allocation is optimized, and the market is healthy.
The electronic face sheet is a new type of label product that has been developed in recent years. Despite the rapid growth, various problems will occur in the actual production process. Below I will introduce some of the problems and solutions that often occur during the electronic surface processing:
First, the fit problem:
The fit problem is one of the most common problems in the production process of electronic face sheets, mainly due to the unstable control of the strength of the stickers. At present, the mainstream electronic face on the market is divided into upper and lower parts. The upper part requires the combination to be revealed, and the lower part requires the attachment to be uncoverable. Many companies often do not control well in the early stages of producing such products. They often fail to open after the first half of the fit, or they can be uncovered after the lower half fits.
Generally, there are two kinds of bonding processes for electronic surface sheets. One is that the upper and lower parts are respectively glued with different glues (or the same glue is used with different amounts of glue to fit); the other is first Apply a layer of varnish to the removable part of the middle layer and apply the glue to the full version. Both of these processes are capable of achieving the upper half and the second half being uncoverable. However, some enterprises have not succeeded in the initial stage of production. The main reasons are as follows:
Stainless Steel Water Bucket,Stainless Steel Water Pail,Stainless Water Bucket,Flat Sided Water Bucket
Jiangmen Junerte Stainless Steel Kitchenware Co.,Ltd , https://www.junertejm.com