After the installation of the wooden door, the inspection and inspection should be carried out after the installation of the door cover dumb and the door leaf. How do we proceed?
First, the installation check of the door cover dumb
1. Door panel material: It is necessary to avoid the pure density board provided by the manufacturer on the market. The long-term use of the door may cause tilting and sinking. Fixing of the sleeve: The three sides of the sleeve are fixed by screws, and the sleeve is fixed by the styrofoam between the wall and the wall of the hole, without using nails.
2. The connection between the horizontal frame and the vertical frame of the door cover: the connection between the horizontal frame and the vertical frame of the door cover, to achieve the standard of tight, flat and no misalignment; the angle between the vertical frame and the horizontal frame is 90 degrees. The gap between the panel and the wall can be fixed by a wooden wedge. Adjustment between the panel and the wall: The hammer can be used to further adjust the verticality of the panel to the wall and the ground. It is necessary to ensure that the horizontal and vertical panels are perpendicular to the wall surface.
3. Fixed plate: After the vertical adjustment of the plate is completed, the styrofoam should be used and fixed by the struts so that the plate and the hole can be fully bonded and firmer. The struts should be removed after 30 minutes.
Second, the door after the fixed inspection
1. The wood block we are talking about now refers to the piece at the bottom of the wooden door, which plays a protective function. It can prevent the paint from being thrown off during the handling of the wooden door and can be removed when the door is installed.
2. Pay attention to the depth of the groove, which should be consistent with the thickness of the single piece hinge. After installing the door, the hinges on both sides should be as flat as the edge of the door and the edge of the door. In addition, it should be noted that the screws should not be tilted. If the screws are tilted, or the hinges are pressed against each other after closing the door, the service life of the hinges is affected.
3. The specifications on both sides of the hinge are like this. The upper side of the door can be directly screwed up and fully fixed. On the side of the door cover, you can put two screws first, and the remaining two can be used up to the end to avoid a slight deviation of the hinge position and easy adjustment.
4. After the hinge is installed and the door leaf is fixed, pay attention to check the gap between the door leaf and the upper frame, the side frame and the ground. If the gap is too large or too small, the hinge should be adjusted again.
We use shadows and highlights to change the facial features. For example, if you think your nose is not strong enough and your chin is not sharp enough, you can fix it by repairing your face. It is a very magical makeup method. It can change a person's face shape and make you look thinner and more beautiful. However, it should be noted that facial repair is also a technical activity, which requires more practice to find a suitable facial repair plan. You must not hope to improve your appearance at the beginning. The most important thing is to accept your appearance from the bottom of your heart, cultivate your connotation and not be superficial.
Bronzer,Face Contouring Makeup Bronzer,High Quality Bronzer
Suzhou Yimeijia368 Biological Technology Co.,Ltd. , https://www.yimeijiabeauty.com