[Company Sports Equipment Co., Ltd. official website news] You are really good, back to the company's official website, thank you for the high value of the face, but also to read Xiaobian articles, hoping to get your resonance and inspiration! The company's brand children's toys and children's slides: suitable for playgrounds, parks, kindergartens, communities, shopping malls and other indoor and outdoor places, set fitness and entertainment in one, to bring children a different experience!
1. The basic definition of toys:
1). Toys: One or several items intended for children under the age of 14.
2). Accessibility: Simulate that the probe can be touched with your finger.
3). Small objects: When not being squeezed, they can be completely accommodated in measuring cylinders with a diameter of 31.7mm and a depth of 25.4mm and 57.1mm, respectively. Toys or toy parts (excluding soft products such as plush, textiles and chemical fiber).
4). Sharp point: The tip of the cusp tester's indicator light when tested according to the specified procedure.
5).Lean edge: When cutting according to the stipulated procedure, cut the cumulative length of the tape to a sharp edge of half or more of the length.
6).Baby toys: toys intended for children under 18 months.
7). Non-baby playing children: Toys intended for use by children over 18 months old.
2. Basic requirements for toy safety:
1) The thickness of the plastic film should be 0.0381mm, otherwise it should meet certain conditions (see toy safety standards for details).
2). There should be no danger of burrs and burrs on the accessible edges, corners, or parting lines of plastic toys.
3). The toy surface coating (paint, electroplating) prohibits the use of lead or lead compounds more than 0.06% paint. 4). Toys in the electronic circuit, mechanical transmission or components should not be touched.
3. Some toy safety test items:
1). Tensile test: Any part that can be grasped by a child's index finger or thumb or bitten by teeth should undergo this test and be added to the requested strength within 5 seconds and maintained for 10 seconds.
2). Drop test: Free fall from the designated height to the designated media.
3). Battery Reverse Assembly Test: Place one or more batteries in the opposite direction of the polarity marked in the battery box.
4). Battery Short-Circuit Test: Short-circuit any two electrodes with a hard and straight nude wire 0.5mm in length and not less than 25mm in length.
5). Point test: Use a 1 pound force test point near the test point of the tester.
6). Edge test: Hold the edge of the edge measuring instrument (wrap around a layer of specified tape) with the edge under test to rotate the shaft one rotation.
7). Accessibility test: Use your finger to simulate the probe trying to touch any part of the toy. Adjust each joint to any angle during the test.
8). Small object identification: Put the object to be authenticated on the small object test tube at any angle without any force.
9).Sound ring test: Put the object to be appraised at any angle in the opening of the sound loop tester without any force.
10). Flexion test: Metal wires that can be bent by children in toys should be subjected to this test.
4. Toy certification
Toy certification refers to the certification of toy products. It does not include the testing of toy products and the management system certification of toy factories (such as ICTI certification, ISO9001 certification, etc.). Toy certification can be divided into two major categories: toy 3C certification (applicable to some domestic toys) and toy quality license (applicable to export toys).
"CCC certification" means 3C certification. It is the abbreviation of the compulsory product certification system (English name certification). It is a national government that protects the lives of people and plants and animals, protects the environment, and protects national security. It is implemented in accordance with laws and regulations. A product conformity assessment system that requires products to comply with national standards and technical regulations. Mandatory product certification is the mandatory testing and review of products listed in the Catalogue through the development of compulsory product certification product catalogs and the implementation of mandatory product certification procedures. All products listed in the compulsory product certification list have not been certified by the designated certification body, and no certification mark has been added in accordance with the regulations. They must not be imported, sold in factories, or used in business service establishments.
5, toy safety mandatory standards:
GB 6675.1-2014, GB 6675.2-2014, GB 6675.3-2014, GB 6675.4-2014
For more information, please return to the company's official website of Sports Equipment Co., Ltd. Advisory telephone. The company's pleasure and dedication to serve you! Factory address: No. 16, Chuangqiang Road, Lucheng District, Wenzhou City Light Industry Park.
Ningbo XISXI E-commerce Co., Ltd , https://www.petspetscleaning.com