Immediate recovery of film undercut

The plastics used to make films are PVC, PP, PE, etc. The main products are shrink film, cling film, wrapping paper, packaging bags, transparent tape, flat woven bags, flat woven cloth, etc. Mostly used for packaging. The thickness of the general film is about 0.01mm~0.08mm. Molding methods include blow molding and flat die extrusion of disc molds. Some of the molding types often use longitudinal extension to increase the toughness of the product.

The main equipment for the molding process of these products is the extruder (EXTRUDER), which is produced in a continuous molding process. In the initial production (before printing), in order to meet the required size of the product, excess edge material must be cut. , also known as ear material.

Traditionally, the traders will wind down the bales into bundles and sell them to the acquirer to produce recycled secondary materials, or self-made recycled pellets for other different products. This recycling method can no longer meet the requirements of modern and highly competitive business management. Because it is not economical, the cost is too high. Available "recover immediately" means:

1, while cutting the film ear material, it will be taken simultaneously,

2. After being crushed in a closed grinder,

3, immediately cooperate with the delivery process,

4、Automatic mixing with quantitative ratio and raw materials, recycling recycled original products. This can improve traditional recycling problems, reduce costs, and improve economic and management benefits.