1. When the machine branches off and runs at the same time as other machines, it will not only damage the machine's function, but also cause the plugs and sockets to dissipate heat, posing a fire hazard. Special attention must be paid to the special voltage and capacity that are only available for this packer.
2. The ground terminal of the baling machine must be connected to the ground wire. There is a risk of electric shock if the ground wire is not connected or not fully connected.
3. Use an extension cord with a cross-sectional area of ​​0.75mm2 or more and 10m or less. Use of cords outside this range will not only damage the machine's function, but also cause overheating of plugs and sockets, which may cause fire.
4. Be sure to use gloves, protective glasses, and masks when installing or packing. Failure to use it may result in injury or health hazards.
5. Pneumatic balers use packing straps on packed objects. Do not use for other purposes. Packaged items refer to items that need to be packaged. Do not put your hands or body close to the main unit.
6. Do not remove the panel, jacket, door, etc. when using the machine. When you remove the parts, not only will the machine malfunction, but it will easily lead to ginseng accidents.
7. Do not remodel.
8. Do not place the power cord on the forklift, etc., or directly press it against a power cord or other places. Once the skin breaks, there is a danger of disconnection.
9. Do not plug in the power plug with wet hands. There is a risk of electric shock.
10. Packed with water or damp items, there is a risk of electric shock.
11. When not in use, the plug on the socket must be unplugged. Degradation of insulation, resulting in electric shock or fire due to leakage.
12. When the hot plate is at a very high temperature, do not place flammable objects around the machine. There is a risk of fire.
2. The ground terminal of the baling machine must be connected to the ground wire. There is a risk of electric shock if the ground wire is not connected or not fully connected.
3. Use an extension cord with a cross-sectional area of ​​0.75mm2 or more and 10m or less. Use of cords outside this range will not only damage the machine's function, but also cause overheating of plugs and sockets, which may cause fire.
4. Be sure to use gloves, protective glasses, and masks when installing or packing. Failure to use it may result in injury or health hazards.
5. Pneumatic balers use packing straps on packed objects. Do not use for other purposes. Packaged items refer to items that need to be packaged. Do not put your hands or body close to the main unit.
6. Do not remove the panel, jacket, door, etc. when using the machine. When you remove the parts, not only will the machine malfunction, but it will easily lead to ginseng accidents.
7. Do not remodel.
8. Do not place the power cord on the forklift, etc., or directly press it against a power cord or other places. Once the skin breaks, there is a danger of disconnection.
9. Do not plug in the power plug with wet hands. There is a risk of electric shock.
10. Packed with water or damp items, there is a risk of electric shock.
11. When not in use, the plug on the socket must be unplugged. Degradation of insulation, resulting in electric shock or fire due to leakage.
12. When the hot plate is at a very high temperature, do not place flammable objects around the machine. There is a risk of fire.
The headrest, backrest and footrest of this portable facial bed can be adjusted, and some of the portable Facial Bed can be foldable. This design is very suitable for taking and moving. It is more convenient for beauticians and beauty salon. Even you can use it as the chair when you have a sun bath. Colors optional and comes with a year warranty. If you want to view more products, welcome to contact us.
Facial Treatment Bed, Foldable Facial Bed, Portable Facial Bed, Portable Facial Bed Wholesale
TOM SPA BEAUTY SALON EQUIPMENT CO.,LTD , https://www.tomspabeauty.com