The drop test machine is a test device for testing the drop resistance and drop resistance performance of the product. The drop test machine mainly tests the damage situation of the product after it is packaged, and evaluates the impact strength of the component during the handling process. Let us discuss the standard operating method of the drop test machine together.
1. For wiring, connect the supplied power cable to the three-phase power supply and ground it. Connect the control box and the test machine with the connection cable provided with the plug according to the adaption of the plug, and test the up / down command. (If you press the up key but run down or press the down key but run up during the trial operation, just change the number of phases at the power supply.
2. The drop height adjustment of the drop test machine: turn on the power of the main unit, set the height required for the test (the method is as follows), press the up button to make it reach the set height; if it stops in the middle, you must make it reach the set height before you can Execute a reverse run command;
3. Place the measured object on the work surface, and then fix it with the fixing rod;
4. Press the up key to raise the measured object to the set height;
5. Press the drop button of the drop test machine to make the worktable instantly disengage from the measured object, and the measured object will do free fall movement;
6. Press the reset button to restore the workbench to working state;
7. If the test is repeated, repeat the above steps.
8. After the test: press the lower button to make the worktable work to the lowest position and turn off the power button.
Shoulder Bag,Studded Crossbody Bag,Suitable For Men Shoulder Bag,Pu Material Women's Waist Bag
TAIZHOU ORCHIDLAND IMPORT&EXPORT CO.,LTD , https://www.orchidlandgifts.com