[ Chinese wardrobe net ] It is my biggest dream to have a cloakroom. Every woman will have a house with a dress...
I know that I don't have so many clothes, bags, shoes... but all of them make me feel like I have a head office...
For this cloakroom, I racked my brains. First, I planned to set up a cloakroom under the stairs. But when the stairs were in the living room, there would be embarrassment to find clothes to be in front of the guests. The place was not too big.
Then I am going to sacrifice my attic room, but looking for clothes to stay close to where I live? The loft is paved with geothermal heat and can only go out of the bedroom---go to the living room---to the stairs---to the cloakroom, no, too arrogant~ I have an idea that separates the corner of the bedroom and is denied by gg .
Later, I wanted to shrink the living room and go straight to the living room to make a "secret road", but even so, the "cloakroom" would be very narrow and dark.
In the end, I decided to make a 3*2 meter overall large wardrobe in the bedroom.
Since it is all over, my assumption is:
1. The large wardrobe is made of finger joint board, which is environmentally friendly and fresh. The design of the large wardrobe is based on the number of clothes you like, so that each type of clothes can be placed and arranged. Partial hardware is used for easy use. Swimsuits, sportswear, bags, etc. are specially placed, and you don’t need to rummage when you need them. Partial drawers are easy to use. The whole wardrobe does not have a cabinet door. I used curtains to cover my brains. I looked at my existing clothes and closed my eyes. Finally, my overall wardrobe design was released~
Start work
In fact, this whole wardrobe was originally intended to be made by myself. For this reason, I bought the connector specially, but after several experiments, I found that the price of pine is soft, and often because of the misplacement of the positioning, it causes skewing... In the absence of woodworking short courses. Next, I had to give up the DIY program...
The whole wardrobe curtain originally used pearls... I have posted a question, but I also gave up... because it is too expensive...
Details: The backboard is a MDF + Boeing film. In fact, the woodworker should open a slot on the back and owe the backplane, but many woodworkers are lazy and directly nail the backboard with a gas nail gun. So that the nails may come out later, and if the plug is more than enough, it may break down directly.
General shaping
Drawer installation is complete~~ I want to find these small Dongdong in the future, as long as I can see it at a glance, I am very excited~ I have several hardware pieces.
This trousers slide rail also gave me dear gg~~ In fact, I wanted to use that drawer type trousers, but the smallest one is 700. I only have less than 600 width here, and the customization is too slow, so This way ~ ~ but also good, so the space next to the space, gg can hang his long clothes, you do not need to occupy the space of my coat skirt ~ ~ 嘿嘿 ......
Finished the effect ~~ Attention, the carpenter master gave a "hat", which contained curtain rails, which made it look good and hid the slides~~
cost:
Finger joint plate six 200*6=1200 hardware + drawer slide rail about 300 yuan woodwork are collectively calculated, there is no separate offer overall about 2000 or so, but it is solid wood oh ~ I think the most important thing is that this is your own Designed, so completely and with ~ ~ no waste of space, no money.
The backboard is a MDF + Boeing film, about 100 yuan.
Usb Charger,Type C Charger,Foldable Phone Holder,Microfibre Screen Cleaner
Chic Products (China) Co., Ltd. , https://www.chic-gifts.com