Uhlmann has also been committed to the development of small, efficient and flexible blister packaging machines. The company predicts that in the near future, more than 85% of the output of pharmaceutical products will be packaged in quantities of 10,000 boards per batch. The company believes that using this type of production and using an optimized production line with a higher output will be a huge waste. Because the change of packaging will delay a lot of production time, it will cause a huge waste of materials. At present, Uhlmann has introduced the B1260 compact, efficient and flexible blister packaging machine. The machine is mainly designed to meet the needs of the market for the production of small batches of products. It has a length of about 2 meters and a speed of 240 boards/minute. It can automatically adjust the network transmission before bagging to ensure the safety of the process and the quality of the blister. It is the same as a product produced on a large-scale production line. When the machine is used to operate the formed film, the diameter of the roller can reach 600mm, the roller can reach 240mm when the cover is covered with tin foil, and can continuously run for 1.5 hours without interruption, and the roller is used for continuous operation, and all running processes are adopted. A touch-enabled screen capable of displaying production data for monitoring. The main features of the B1260 include the use of Uhlmann thermoforming machines with GMP-approved cantilever designs to make the cleaning of the equipment very easy; the machine can handle a wide range of different substrates; when automating 25,000-panel blister production, all The machine only needs one operator to manage; the change of form is carried out through the clamp system located in the middle, its great flexibility saves money and time greatly.
Source: Pharmaceutical Packaging Solutions
There are so many many brushes:washes/glazes, rounds, flats, filberts and liners and more. Choosing the right type for the technique is important. Let`s look at the different types. Flat Brushes-Flats are brushes with a straight chisel edge and square shaped filaments. These can be known as shades if they`re in smaller sizes and washes/glazes if in bigger sizes. Large areas are painted with a wash/glaze brush whereas smaller flats are used for small areas of painting
Round brushes-Round brushes have a large diameter of the ferrule, more so than a liner, which can be used for applying thick to thin lines, filling in odd shaped areas, painting details and work great for lettering. Liners don`t hold as much paint as a round, however, they are super great for creating lines or curves. Script liners are similar to liners but the filaments are much longer and hold more paint. A round brush tapers to a pointed tip – several types of rounds are referred to rounds, liners or script liners. Angle brushes are filaments that have been cut on an angle – these are excellent to use in small or curved areas of the painting.Filberts Brushes with oval shaped filaments are known as filberts in smaller sizes and oval wash in larger sizes. Both shapes can be used for base coating, stroke work and more. There are filbert combs, filbert wash and more.Mop Brushes-Then there are mop brushes–great for blending and smoothing out small areas. They`re also ideal for applying powdered pigments–just dust them lightly over hot or tacky wax.Specialty Brushes-Then there are all the speciality brushes on the market used for certain techniques and garner their own results–fan, deer-foot, stumbler, mops,stencil and more.
Oil Painting Brushes,Painting Art Brush,Badger Hair Painting Brush,Multi Functional Brush Set
SAMINA FORAM (SHENZHEN) CO., LIMITED. , https://www.saminabrush.com