[ Chinese wardrobe net ] Drawer face replacement glass: The walk-in cloakroom is open, so underwear worn and commonly used bath towels should be placed in the chest of drawers. The traditional chest of drawers is made of wood, and the latest chest of drawers is glass-faced. This drawer is not only more beautiful, but also more convenient for taking clothes.
Tie lattice (Baibao): Every successful man will have multiple ties, and these ties will be lined up in a non-tie. The shape of the tie box is smaller than that of a drawer, and the position is not limited, so the owner can arrange the position of the tie grid freely by "seeing the stitches".
Pulling the laminate: Stacking the woolen clothing codes together can be very troublesome to find together. If the drawing board is used, the stacked clothes can be well organized, but it also has the disadvantage of less storage space, so please choose carefully.
Pants rack: The stacked pants will have creases, while the trousers racks will leave the trousers with no traces. Therefore, the trousers rack in the cloakroom is required. It requires no less than 600mm of hanging space, so the trousers rack usually It will be placed under the drawer, which will save space.
Dressing mirror: A dressing mirror is an essential part of the walk-in cloakroom. When you put on a beautiful new dress, you must take a photo in front of the mirror. Therefore, it is not necessary to put a dressing mirror on the side of the cabinet. forget. The height of the dressing mirror is 1000?--1400?, and the width is about 400?.
The kicking of the cabinet: according to the kicking of the room in the cabinet, it is generally 5? than the skirting of the wall; when the height of the kicking of the wall is unknown, the height of the kicking of the cabinet is designed to be 100?.
Sliding door: sliding door is divided into closet door, partition door, folding door, swing door, closet door
1. The frame of the closet door: the strength of galvanized steel is relatively large and it is not easy to be deformed.
2. Pulley: The lower load-bearing wheel of nylon fiberglass has large bearing capacity and strong wear resistance. It is safer to install the anti-jump card on the following rails.
3, the identification of the pulley: repeated push and pull no noise, no hair, smooth and smooth sliding, when moving the door, will not jump.
Partition door:
1. The frame aluminum-magnesium-titanium alloy has high strength, is not easy to wear, and is relatively light and easy to push and pull. It can be placed in the kitchen, balcony, bathroom, etc.
2. For the large amount of sand, it is recommended that you install a sealing strip when installing the partition door, which can be used for shock absorption and buffering.
3. The lower pulley of the partition door is built-in, beautiful and practical.
Daily maintenance of sliding doors
A. Keep the track clean.
B. Strictly prevent heavy objects from hitting the track.
C. Clean with a non-corrosive cleaning solution
D. If the mirror or board is damaged, please ask a professional to replace it.
E. For safety reasons, always check whether the anti-jump device is in effect.
F. When the door body and the wall are not tight, please adjust the lower pulley screw to achieve the tightness of the door and the wall.
2 Person Sound Proof Meeting Pod
2 Person Sound Proof Meeting Pod,soundproof pods office,office phone booth
Feat Top International(China) CO.,LTD , https://www.lounge-seating.com